Details
Advantages:
Significantly better stock removal rate than conventional double cut burs.
Advantages 1:
Saves time and money with very high stock removal rate on key materials.
Advantages 2:
Comfortable working with reduced vibration and less noise.
Advantages 3:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance OMNI cut
KEYWORD 2:
Cylindrical shape with radius end
Length (Packaging unit) UNIT:
MANUFACTURER_TYPE_DESCR:
WRC 9,5x19x6,35-150 ALLROUND
Materials that can be worked:
Materials that can be worked 1:
Black annealed cast iron (GTS, GJMB)
Materials that can be worked 10:
Materials that can be worked 11:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 16:
Steel materials with a hardness > 54 HRC
Materials that can be worked 17:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 18:
Steels over 220 HV (> 95 HB)
Materials that can be worked 19:
Steels up to 220 HV (< 95 HB)
Materials that can be worked 2:
Materials that can be worked 20:
Materials that can be worked 21:
Materials that can be worked 22:
Materials that can be worked 23:
White annealed cast iron (GTW, GJMW)
Materials that can be worked 24:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 9:
Output name <= 80 characters:
PFERD Carbide Bur SC-3 L6 Cylindrical Radius End OMNI DC 3/8" x 3/4" x 1/4" Shank
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends OMNI cut burs for preventing fatigue, saving resources, and producing excellent work.
PFERDERGONOMICS:
PFERDERGONOMICS recommends OMNI cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.
Product issue name web for bmecat:
High-performance tungsten carbide burs, OMNI double cut, Cylindrical bur with radius end - Shape C
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Recommendations for use 1:
Observe the recommended rotational speed.
Recommendations for use 2:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, grey cast iron, white cast iron:
RPM from, grey cast iron, white cast iron UNIT:
RPM from, hard non-ferrous metals:
RPM from, hard non-ferrous metals UNIT:
RPM from, hardened, heat-treated steels over 370 H:
RPM from, rust and acid-resistant steels:
RPM from, rust and acid-resistant steels UNIT:
RPM from, steels up to 370 HV (38 HRC):
RPM from, steels up to 370 HV (38 HRC) UNIT:
RPM to, grey cast iron, white cast iron:
RPM to, grey cast iron, white cast iron UNIT:
RPM to, hard non-ferrous metals:
RPM to, hard non-ferrous metals UNIT:
RPM to, hardened, heat-treated steels over 370 HV:
RPM to, rust and acid-resistant steels:
RPM to, rust and acid-resistant steels UNIT:
RPM to, steels up to 370 HV (38 HRC):
RPM to, steels up to 370 HV (38 HRC) UNIT:
Safety notes:
Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.
Safety notes 1:
For safety reasons, the maximum application speeds with contact with the workpiece require a reduction in the recommended speed of tungsten carbide burs with standard shanks. Observe the reduced speeds outlined in the product details.
Safety notes 2:
When working with longer shanks, it is crucial that the bur is in contact with the workpiece (or inserted in the hole or slot to be machined) before the power tool is turned on. As a rule, the bur must remain in contact with the workpiece for as long as th
Safety notes 3:
Not designed for robotic or stationary applications due to risk of bending. Use only rigid clamping systems/power tools.
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
