Details
Advantages:
Maximum precision and efficiency when working on delicate workpieces.
Advantages 1:
Highly flexible, enabling optimal adaptation to the workpiece contour.
Advantages 2:
The dimensional accuracy of the workpieces remains unchanged.
Advantages 3:
In tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
Advantages 4:
The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
Advantages 5:
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Applications 3:
Structuring (matt finishing, brush matting and satin finishing)
Dia. filament material UNIT:
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 3:
Single stem, single-spiral / micro-abrasive / shank-mounted
Length (Packaging unit) UNIT:
MANUFACTURER_TYPE_DESCR:
M-BRAD PWR TUBE MICROABR SC 0.030
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Steel materials with a hardness > 54 HRC
Output name <= 80 characters:
PFERD Microabrasive Silicate Tube Brush .030 Dia. 2,000 Grit 4" OAL
Product issue name web for bmecat:
Tube brushes, micro-abrasive, shank-mounted
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use coolant for applications where large amounts of heat are produced.
Recommendations for use 1:
Please observe the recommended rotational speeds.
Recommendations for use 2:
Use with clockwise rotation.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
For safe use, guide the brush into the workpiece before beginning work.
Safety notes 1:
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
