Details
Advantages:
The bridle prevents the wires spreading out sideways.
Advantages 1:
The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled.
Advantages 2:
Optimal access to hard-to-reach areas such as recesses and drilled holes.
Advantages 3:
If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour.
Advantages 4:
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Applications 2:
Structuring (matt finishing, brush matting and satin finishing)
Dia. filament material UNIT:
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 3:
With ring / shank-mounted
Length (Packaging unit) UNIT:
Length, filament to ring:
Length, filament to ring UNIT:
MANUFACTURER_TYPE_DESCR:
1" M-BRAD END .040 CO 80 BANDED
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Soft titanium alloys (tensile strength 500 N/mm²)
Materials that can be worked 11:
Materials that can be worked 12:
Steel materials with a hardness > 54 HRC
Materials that can be worked 13:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
High-temperature-resistant materials
Materials that can be worked 7:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 8:
Nickel or titanium-based superalloys
Materials that can be worked 9:
Output name <= 80 characters:
PFERD M-BRAD® End Brush - Banded 1" Dia. .040/80 Grit Ceramic Oxide 1/4" Shank
Product issue name web for bmecat:
End brushes crimped with bridle, shank-mounted
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
Recommendations for use 2:
For best performance, use a power tool with a minimum output of 300 watts.
Recommendations for use 3:
Remove the bridle once the filament is worn down. Then the rest of the filament can be used.
Recommendations for use 4:
Remove the bridle before starting work if you would like to ensure particularly flexible working, achieve a large spreading diameter or access hard-to-reach areas.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
