Details
Advantages:
Can be used with all common stationary drive systems and bench grinders.
Advantages 1:
The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
Advantages 2:
Highly flexible, enabling optimal adaptation to the workpiece contour.
Advantages 3:
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Dia. filament material UNIT:
Diam. arbor hole with adapter:
Diam. arbor hole with adapter UNIT:
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
Length (Packaging unit) UNIT:
MANUFACTURER_TYPE_DESCR:
4" MBRAD NF WHL .014/600 PCD 5/8" AH
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Materials that can be worked 11:
Materials that can be worked 12:
Steel materials with a hardness > 54 HRC
Materials that can be worked 13:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 16:
Materials that can be worked 17:
Wear-resistant coatings (powder metal alloys and hardfacing alloys)
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
High-temperature-resistant materials
Materials that can be worked 6:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 7:
Nickel or titanium-based superalloys
Materials that can be worked 8:
Materials that can be worked 9:
Soft titanium alloys (tensile strength 500 N/mm²)
Output name <= 80 characters:
PFERD M-BRAD® Wheel Brush 4" Dia Narrow Face 600 Grit Diamond 5/8" Arbor
Product issue name web for bmecat:
Wheel brushes crimped slim, with hole
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
REFERENCE_FEATURE_GROUP_ID:
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
